Basic Migration Steps
Issue 2.1 June 2006 939
Additional tasks
Do this task only if you are not performing a full backup and restore to transfer the configuration
data from the S8700 or S8710 to the S8720.
Avaya technical support
representatives only: Obtain
the static craft password.
Call the ASG Conversant number, 800-248-1234 or
1-720-444-5557 and follow the prompts to get the
password. You need the Product ID, the FL, or IL
number of the customer.
Run the Automatic
Registration Tool (ART) for
the INADS IP address, if
necessary.
This step is necessary if the configuration of the
customer INADS alarming modem has changed as
well as any changes to the system alarming
configuration.
ART is available only to Avaya associates. Business
Partners can call 800-295-0099.
Verify that you have copied
all necessary files to your
computer
These files can include:
● service packs
● license file
● authentication file
● firmware for programmable circuit packs
9
Task Description
3 of 3
9
Task Description
Verify that you have the
required, customer-provided
network information. Obtain
a filled out Electronic
Preinstallation Worksheet
(EPW)
The EPW is an Excel spreadsheet providing the
customer’s network information needed to use the
Avaya Installation Wizard to configure the control
network components. Get the EPW from the Avaya
project manager, Avaya software technician, or
customer network administrator. A blank EPW is
available at the Avaya Installation Wizard web site
(http://support.avaya.com/avayaiw/
).
To Next Page
Loading...
