Migrating from an S8700 or S8710 Media Server to an S8720 Media Server
942 Upgrading, Migrating, and Converting Media Servers and Gateways
Additional documentation needed.
Migration tasks
Perform the following tasks to migrate an S8700 or S8710 Media Server to an S8720 Media
Server.
Note:
Note: The term first S8720 or second S8720 does not imply the actual media server
number. Rather this references the sequence of events in the migration.
Premigration administration:
● Upgrading H.248 media gateways, LSPs, and ESSs (if being used) on page 947
● Upgrading software on the local survivable processors on page 947
● Upgrading firmware on media gateways and media modules on page 948
● Verifying hardware on page 948
● Using Enterprise Survivable Servers on page 948
● Using local survivable processors on page 948
On the active S8700 or S8710 Media Server:
1. Configuring Telnet for Windows 2000 or WindowsXP
on page 949
2. Clearing the ARP cache on the laptop computer
on page 949
3. Connecting to the active media server
on page 950
9
Document Description
Quick Start for Hardware
Installation: Avaya
S8700-Series Media
Servers (555-245-703)
A quick-reference guide that provides physical
installation and connection information.
Administration for Network
Connectivity for Avaya
Communication Manager
(555-233-504)
Provides information on network connectivity.
Installing and Configuring
an Avaya S8700-Series
Media Server (03-300145)
Provides installation instructions for the S8700 and the
S8710 Media Servers.
To Next Page
Loading...
