Migrating from an S8700 or S8710 Media Server to an S8720 Media Server
998 Upgrading, Migrating, and Converting Media Servers and Gateways
Rebooting the first S8720 Media Server
Reboot is necessary to initialize server settings that are restored but not yet activated.
To reboot the first S8720 Media Server:
1. On the Maintenance Web Interface, under Server, click Shutdown Server.
The system displays the Shutdown Server window.
2. Make the following selections:
● Select Immediate Shutdown
● Select Restart Server after Shutdown
3. Click Shutdown.
Accessing the first S8720 Media Server
To access the first S8720 Media Server:
1. Clear the ARP cache on the laptop if necessary. For more information, see Connecting to
the active media server on page 950 and return here.
2. Open a browser and connect to the media server.
3. Log in. For more information, see Accessing the media server maintenance web
interface on page 953.
4. Suppress all alarms.
Confirming the product ID on the first S8720 Media Server
To confirm the Product ID:
1. Use the PuTTY application to reaccess the server using the secure shell (SSH) protocol.
2. Log in as craft or dadmin.
3. At the prompt, type productid. Press Enter.
The productid must match the value record in Obtaining the Product ID on the standby
S8700 or S8710 Media Server on page 976. If value does not match, escalate the problem
immediately.
To Next Page
Loading...
