Upgrade Tasks
Issue 2.1 June 2006 287
To copy files to the media server:
1. On the Maintenance Web Interface, under Miscellaneous, select Download Files.
2. Select File(s) to download from the machine I’m using to connect to the server.
3. Click Browse next to the top field to open the Choose File window on your computer. Find
the files that you need to copy to the media server.
4. Click Download to copy the files to the media server.
The system copies the files automatically to the default file location.
Determining active IPSIs (duplicated control network only)
Note:
Note: With a duplicated control network, you must download new firmware to an active
IPSI. However, whenever possible, activate the new firmware to a standby IPSI.
The following step displays all the IPSIs.
1. Type list ipserver-interface and press Enter to determine which IPSIs in port
networks are active.
2. Print the page, which shows the board locations (Bd Loc) and which IPSIs are active or
standby (Control State) or write down the information.
Busying out standby IPSIs (duplicated control network only)
The following steps busyout the standby IPSIs.
1. Type busyout ipserver-interface standbyIPSI, where standbyIPSI is an IPSI in
standby mode and press Enter to busy the standby IPSI out.
2. Repeat for each IPSI circuit pack in standby mode.
To Next Page
Loading...
