Migrating a DEFINITY Server SI Direct-Connect in an SCC to a Direct-Connect
504 Upgrading, Migrating, and Converting Media Servers and Gateways
9. If necessary, click Yes to accept the server’s host key.
The system displays the PuTTY window.
10. Log in as craft.
Assigning IP addresses to the IPSI circuit packs
When you use static IP addressing, you must assign IP addresses to the IP server interface
circuit packs.
Using static addressing
You can administer static IP addresses for the IPSI circuit packs. You administer the addresses
directly through the Ethernet port connection on the IPSI faceplate switch which is the top port
(Figure 19: Connecting directly to the IPSI
on page 505).
To Next Page
Loading...
Need help?
General
