Migrating to an Avaya S8700-Series Media Server
614 Upgrading, Migrating, and Converting Media Servers and Gateways
DEFINITY Server CSI or DEFINITY ONE/S8100 in a CMC
You can only migrate a DEFINITY Server CSI or a DEFINITY ONE/S8100 in a compact modular
cabinet (CMC) to an Avaya S8710 or an S8720 with an IP-PNC configuration.
When you migrate an existing DEFINITY Server CSI or a DEFINITY ONE in a CMC, you use
one TN2312BP IPSI circuit pack to control the PN. If a CSI, you replace the TN2182 Tone Clock
circuit pack with the IPSI which you install in the A position of the cabinet. You also must remove
the processor circuit pack. If a DEFINITY ONE, you replace the processor circuit pack with the
IPSI.
This migration affects service because, if a CSI, you must turn off the CMCs to replace the
processor and tone clock circuit packs. Before you turn off the cabinets, you must perform some
premigration administration.
Avaya IP600/S8100 in a G600
You can only migrate an Avaya IP600 to an Avaya S8710 or an S8720 with an IP-PNC
configuration.
When you migrate an existing Avaya IP600, you use one TN2312BP IPSI circuit pack to control
the PN. You replace the processor circuit pack with the IPSI in the cabinet in the A position.
This migration affects service becuase you must turn off the IP600 chassis to replace the
processor. Before you turn off the chassis, you must perform some premigration administration.
Prerequisites for migrating to an S8700-Series Media
Server
This section describes the following tasks that you must complete before you start the
migration.
● Tasks that you must perform before you go on site
● Tasks that you must perform on site before you start the migration from an existing
DEFINITY system
● Tasks that you must perform on site before you start the migration
● Documents that Avaya recommends that you have before you start the migration
To Next Page
Loading...
