On the standby S8710 Media Server
Issue 2.1 June 2006 929
Completing the cable migration
To complete the cable migration:
1. Connect the CAT5 duplication cable to both media servers.
2. Connect the new yellow LC fiber-optic cable to both media servers.
3. Connect the Services laptop to the S8710 Media Server,.That is, connect the laptop to
media server 2.
4. Release the S8710 Media Server. That is, release media server 2. For more information,
see Releasing the media server
on page 928 and return here.
5. Move the modem connections from the S8700 Media Servers to the S8710 Media Server.
On the standby S8710 Media Server
Note:
Note: This section applies to media server 2.
Accessing the standby media server
To access the standby media server:
1. Clear the ARP cache on the laptop if necessary. For more information, see Clearing the
ARP cache on the laptop computer on page 902 and return here.
2. If you are not already connected to the standby media server, connect to the standby media
server.
3. Log in. For more information, see Accessing the media server maintenance web
interface on page 904 and return here.
Pinging all the connections to the media server
To ping all connections to the media server:
1. Under Diagnostics, click Ping.
2. Select Other server(s), All IPSIs, UPS(s), Ethernet switches. Click Execute Ping.
To Next Page
Loading...
