Post-Upgrade tasks
Issue 2.1 June 2006 277
2. Select the data sets. For the main server only, select Avaya Call Processing (ACP)
translations and Save ACP translations prior to backup. An ESS gets translations from
the main server, so there is no reason to backup the translations on an ESS. Do not select
Full Backup because this option does not save translations.
Note:
Note: If you back up to a flashcard, Avaya recommends that you use a different
flashcard from the one with the prior release translations. You might need these
translations if you need to back out of the upgrade, migration, or conversion
procedure.
3. Select the backup method.
4. Click Start Backup to start the back up process.
Releasing alarm suppression on the media server (optional)
If you complete the upgrade well before the time set when you suppressed alarming, you might
want to release alarm suppression manually rather than wait.
1. Access the command line interface of the server with PuTTY with SSH and an IP address of
192.11.13.6.
2. Log in as craft or dadmin.
3. Type almsuppress -n and press Enter to release alarm suppression.
4. Log off.
Logging off all administration applications
When you complete all the administration, log off all the applications that you used.
Disconnecting from the active media server
If you are on site, unplug the laptop computer from the services port on the back of the active
media server.
To Next Page
Loading...
Need help?
General
