Avaya S8100 Series - Upgrade tasks for the new standby media server (second server); Connecting to the standby media server; Accessing the media server maintenance web interface; Busying out the standby media server

Upgrade tasks for the new standby media server (second server)
Issue 2.1 June 2006 233
Upgrade tasks for the new standby media server (second
server)
Connecting to the standby media server
If you are on site, connect to the services port on the back of the standby media server.
If you are off site, log on to the standby media server with the actual IP address of the media
server.
Accessing the media server maintenance web interface
To access the media server:
1. Start the Web browser.
2. In the Address field, type 192.11.13.6. Press Enter to open the login Web page.
3. Log in as craft or dadmin.
4. Select yes to suppress alarms
The system displays the Integrated Management Standard Management Solutions
Maintenance Web page.
5. Click Launch Maintenance Web Interface to go to the main menu.
Busying out the standby media server
To busy out the media server:
1. On the Maintenance Web page, under Server, select Busy-Out Server. Then click Busy
Out to busy out the standby server.
2. Click Status Summary to verify that the standby server is busied out.