Migrating translations
Issue 2.1 June 2006 559
3. Log in as lucent3 to get to the LAC prompt.
4. Type bash. Press Enter to start a BASH session.
5. Type setip. Press Enter to display the current list of IP settings. You will see the following
information:
● cust: IPaddress, subnet mask, gateway
● dns: server name, domain name, 2 DNS server IP addresses
● wins: two WINS server IP addresses
● ras: one remote access server IP address
6. Record this information exactly as displayed.
!
Important:
Important: Include any periods, commas, or other punctuation marks. Record this
information in lowercase or uppercase as the information appears.
Migrating translations
This section describes how to migrate translation files from the existing system to the S8500
Media Server.
Accessing the media server maintenance web interface
To access the media server:
1. Start the Web browser.
2. In the Address field, type 192.11.13.6. Press Enter to open the login Web page.
3. Log in as craft or dadmin.
4. Select yes to suppress alarms
The system displays the Integrated Management Standard Management Solutions
Maintenance Web page.
5. Click Launch Maintenance Web Interface to go to the main menu.
To Next Page
Loading...
