On the standby S8700 or S8710 Media Server
Issue 2.1 June 2006 977
Table 17: Network Interface Card usage
7. Click Continue.
8. In the Corporate LAN Interface section, record the following information for later use:
● IP addresses (under the Corporate LAN Interface area)
● Subnet mask (under the Corporate LAN Interface area)
● Default gateway (under the Corporate LAN Interface area)
9. Click Close Window to exit the Configure Server window.
Busying out the standby S8700 or S8710 Media Server
To busyout the S8700 or S8710 Media Server:
1. On the Maintenance Web Interface, click Busy Out Server.
The system displays the Busy Out Server window.
2. On the Busy-Out Server window, click Busy Out.
The system displays the Busy Out Server Results window.
Shutting down the standby S8700 or S8710 Media Server
!
CAUTION:
CAUTION: Ensure that you are connected to the standby S8700 or S8710 Media Server.
Proceeding with the following steps and being connected to the incorrect media
server can result in service disruption.
To shut down the standby S8700 or S8710 Media Server:
1. Under Server, click Shutdown Server.
The system displays the Shutdown This Server window.
To Next Page
Loading...
Need help?
General
