Post-migration administration
Issue 2.1 June 2006 441
Upgrading firmware
Each TN8412AP S8400 IP Interface (SIPI) circuit pack must be on the most current and same
firmware load. You might need to upgrade the firmware on the SIPI. The most current firmware
load is on the installation CD. To obtain the firmware, you also can go to Avaya Support Web
page at (http://avaya.com/support
and click Downloads.
First, verify the version of firmware that is currently on the SIPI circuit pack.
1. Under Installation and Upgrades, click View IPSI Version. Select Query All and click View
IPSI Version.
2. Verify the firmware release for the TN8412AP SIPI circuit pack.
If necessary, upgrade the firmware on the just installed SIPI circuit pack that you just installed.
For more information, see Upgrading firmware on the IPSIs and SIPIs
on page 283.
You also must upgrade the firmware on the following circuit packs, if necessary.
● UDS1 (TN464GP, TN2464BP, and TN2313AP)
● Maintenance/Test (TN771DP)
● Control LAN (C-LAN) (TN799DP)
● IP Media Processor (TN2302AP)
For more information, see Upgrading firmware on the IPSIs and SIPIs
on page 283.
Administering IA 770 INTUITY AUDIX Messaging
Administer the IA 770 INTUITY AUDIX Messaging as required. For more information, see
Avaya IA 770 INTUITY AUDIX Messaging Application, Administering the S8300 and S8400
Media Servers to work with IA 770.
Testing the installation
Test the complete installation. For more information, see Testing the Complete Configuration on
the Documentation for Avaya Communication Manager Release 3.0, Media Gateways and
Servers CD-ROM.
To Next Page
Loading...
