Migrating from an S8700 or S8710 Media Server to an S8720 Media Server
950 Upgrading, Migrating, and Converting Media Servers and Gateways
4. To access the media server, type ping -t 192.11.13.6. Press Enter.
The -t causes the ping to repeat until you get a response. When you get a response, in
about 3 minutes, wait an additional 30 seconds before you go back to the Web interface.
5. To stop the ping, type ctrl c. Press Enter.
6. Close the MS-DOS window.
Connecting to the active media server
To connect to the active media server:
1. Connect the laptop to the Services port (2) on the back of the active media server with a
cross-connect CAT5 cable.
For S8700 Media Server connections, see Figure 62: Services laptop computer connected
directly to the S8700 Media Server.
To Next Page
Loading...
