Avaya S8100 Series - Connecting to the active media server

On the active S8700 Media Server
Issue 2.1 June 2006 903
4. To access the media server, type ping -t 192.11.13.6. Press Enter.
The -t causes the ping to repeat until you get a response. When you get a response, in
about 3 minutes, wait an additional 30 seconds before you go back to the Web interface.
5. To stop the ping, type ctrl c. Press Enter.
6. Close the MS-DOS window.
Connecting to the active media server
To connect to the active media server:
1. Connect the laptop to the Services port (2) on the back of the active media server with a
cross-connect CAT5 cable (Figure 60: Services laptop computer connected directly to the
S8700 Media Server).
Figure 60: Services laptop computer connected directly to the S8700 Media Server
cadlsrvr KLC 030402
1
2
3
2
1
2
1
554433
22
DAI - 1
DUP
MEMORY
LINE
RECEIVE
TRANS
LINK
STAT
AVAYA
4