Post-migration administration
Issue 2.1 June 2006 345
18. Type cd /etc/opt/defty. Press Enter.
19. Type ls -ltr. Press Enter.
Verify that the xln1 and xln2 files are not zero length.
20. Open a SAT session.
21. Type reset system 4. Press Enter to load the restored translations into memory.
If the restore process fails, you get an error message with the reason for the failure. If that
happens, the translation file is not restored. Resolve the reason for the failure and restart the
process.
Post-migration administration
This section describes the post-migration administration to complete the migration to the S8400
Media Server.
!
Important:
Important: When you format the compact flash card for use in the S8400 Media Server, all
data is erased from the compact flash card.
Note:
Note: Do not use the compact flash card (Comcode 700381841) in an S8100 Windows
system. The operation system does not recognize the compact flash card.
After the migration, you can format the compact flash card (Comcode 700381841) for the S8400
Media Server and use the compact flash card as the backup compact flash card.
Assigning IP addresses to the SIPI circuit packs
When you use static IP addressing, you must assign IP addresses to the SIPI circuit packs.
To Next Page
Loading...
Need help?
General
