On the active S8700 or S8710 Media Server
Issue 2.1 June 2006 953
Accessing the media server maintenance web interface
To access the media server:
1. Start the Web browser.
2. In the Address field, type 192.11.13.6. Press Enter to open the login Web page.
3. Log in as craft or dadmin.
4. Select yes to suppress alarms
The system displays the Integrated Management Standard Management Solutions
Maintenance Web page.
5. Click Launch Maintenance Web Interface to go to the main menu.
Checking the software release
To check the software release:
1. On the Maintenance Web Interface, click Software Version to see what software release is
on the media server.
2. If Communication Manager Release 1.0 or 1.1, upgrade to Communication Manager
Release 1.3.2.
If Communication Manager Release 1.2 or 1.3, apply the upgrade patch.
If Communication Manager Release 2.x or higher, proceed to Clearing the ARP cache on
the laptop computer on page 949.
Clearing alarms
To clear alarms:
1. If Communication Manager Release 1.x, under Alarms and Notification, click View Current
Alarms.
If Communication Manager Release 2.x or higher, under Alarms, click Current Alarms.
2. Select the server alarms to be cleared and click Clear.
3. Resolve any major alarms with SAT commands and a terminal emulation application, such
as Native Configuration Manager or MS HyperTerminal.
To Next Page
Loading...
