Accessing the Maintenance Web Interface
Issue 2.1 June 2006 1245
Finding the IP address of the active media server (duplicated
servers)
To find the IP address of the active media server in a configuration with duplicated servers:
1. Go to the task bar at the bottom right of your PC screen.
2. Right-click the Network Status icon. Click Status, and then click the Details tab.
3. Scroll down until you see the Server IP address. This IP address is for the media server to
which you are connected.
Accessing the Maintenance Web Interface
To access the Maintenance Web Interface. You can either connect:
● Directly to the services port on the media server. For more information, see Connecting to
the media server directly on page 1237.
● Over the customer network.
MS Internet Explorer 5.5 or 6.0 is the only browser that is supported.
When you connect directly to the media server, you must disable all proxy servers. For more
information and instructions, see Browser settings
on page 1250.
To access the Maintenance Web interface:
1. Open the MS Internet Explorer Web browser.
2. Perform one of the following actions:
● If you want to connect directly, in the Address field, type 192.11.13.6.
● If you want to connect remotely, in the Address field, type the IP address or the DNS
host name of the media server.
3. When prompted, log in.
To Next Page
Loading...
