Upgrade tasks
Issue 2.1 June 2006 135
● If fewer than 3 releases resides on the hard disk
a. Select Copy a release to the local hard drive, but do not install it. Click Continue
to view the options for copying the software to the hard disk.
b. Select Copy from this server’s CD-ROM drive: and click Continue.
c. The Choose Software screen appears, which you use to copy files from the source
you selected.
d. Select the release to be copied and click Continue.
e. The system displays the Copy in Progress screen.
f. View the progress screen as the software is copied to the hard disk.
When complete, the system displays the following message:
Success
g. Click Continue to return to the initial Manage Software page.
Removing the CD-ROM from the CD-ROM drive
To release the CD tray and remove the CD:
1. Push the button on the CD-ROM drive to release the CD-ROM tray.
If the tray is not released, go to the Maintenance Web Interface main menu. Under Server
Configuration, click Eject CD-ROM.
2. Remove the Communication Manager CD-ROM from the tray and close the tray.
Upgrade tasks
!
CAUTION:
CAUTION: If you follow the upgrade procedures in this document, the SAMP card boot
timeout in the S8500B does not usually timeout during an upgrade. As a result,
you do not have to disable the SAMP boot timeout prior to an upgrade.
However, if you do not follow the upgrade procedures in this section, but instead,
upgrade the software using a telnet session and the remastering program, you must
disable the SAMP boot timeout first. See "Disabling the boot timeout on Release 3.1
using the SAMP Web page" in the Using the Avaya Server Availability Management
Processor (SAMP), 03-300322.
To Next Page
Loading...
