Avaya S8100 Series - Restoring the Linux migration upgrade set from the network

Migrating from an S8700 Media Server to an S8710 Media Server
926 Upgrading, Migrating, and Converting Media Servers and Gateways
Restoring the Linux migration upgrade set from the network
!
Important:
Important: If you backed up files to the services laptop, do not perform this procedure.
Continue with Restoring the Linux migration upgrade set from the services
laptop on page 921.
!
CAUTION:
CAUTION: You must restore the S8700 Media Server 1 files to the S8710 Media Server 1
and the S8700 Media Server 2 files to the S8710 Media Server 2. On media
server 1, restore the backup set from the standby S8700 Media Server, that is,
restore the backup set from media server 1.
!
CAUTION:
CAUTION: Run restore only once. If you run restore more than once, you can corrupt the
system data. If a restore appears to be incomplete, check the Backup History and
the Backup Logs on the Maintenance Web Interface. Check the system log
through the Linux command line interface. If all these sources indicate that a
restore did not complete, you can safely rerun the restore.
!
CAUTION:
CAUTION: When you receive a network transfer protocol (NTP) failure notice, ignore the
notice. This notice occurs because media server 1 does not have a physical
connection and thus cannot read the NTP.
To restore the Linux migration upgrade set:
1. Under Server Upgrades, click Linux Migration (Backup/Restore).
2. Select Initiate new backup or restore and click Submit
3. Under Restore Method, select FTP. Complete the User Name, the Password, the Host
Name, and the Directory fields for the location of the backup files.
4. Click Submit.
5. Select the Linux migration upgrade set to restore and both Force options and click Restore.
If the Linux migration upgrade set is a mismatch, click Force Restore.
6. Click Status to view the restore progress.
7. Select the upgrade set and click Check Status to view the restore progress.
The restoration is complete when the system displays the following message:
Backup: 0: Restore of <filepath/filename> is completed successfully.