Migrating from a DEFINITY Server CSI in a CMC with an ATA Flash to an S8400 Media Server
368 Upgrading, Migrating, and Converting Media Servers and Gateways
3. To get the IP addresses that match the node names, type list node-names. Press
Enter.
4. Record the information for use after the migration.
Saving translations
This step is important in case you need to back out of the migration.
To save translations:
Note:
Note: Save translations to a flash card.
1. Plug the PCMCIA/Compact Flash adapter in the PCMCIA slot on the TN2402 ProLogix
Processor circuit pack.
2. Type save translation. Press Enter to save translations to the system disk.
3. The system displays a Command successfully completed message or an error message.
Migration tasks
You can reuse the translations from the current system when you migrate to an S8400 Media
Server.
Note:
Note: You must install the new Communication Manager license file on the media
server before you make the change. The SIPI serial number can be used for
licensing purposes.
Perform these tasks to convert a processor port network to a port network (CMC).
To Next Page
Loading...
