EasyManua.ls Logo

Avaya S8100 Series - Migration tasks

Avaya S8100 Series
1262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Migration tasks
Issue 2.1 June 2006 555
You also need the following Additional documentation:
Migration tasks
The information in this section is based on the assumption that the media server complex is
installed, configured, and operational.
!
CAUTION:
CAUTION: This migration affects service. When the PPN is turned off, the system drops all
calls. Service returns when the media server takes control of the IPSIs.
The following list describes the general migration procedures:
Turn off the processor gracefully - pre-conversion administration
Replace the processor circuit pack or tone clock circuit pack with an IP Server Interface
(IPSI) circuit pack
Connect the IPSI circuit pack to the Ethernet switch on the customer network
Assign an IP address to the IPSI circuit pack
You can reuse the translations from the existing system when you migrate to an S8500 Media
Server.
You can reuse the translations from the existing system when you migrate to an S8500 Media
Server.
9
Document Description
Quick Start for Hardware
Installation: Avaya S8500
Media Server (555-245-701)
A quick reference guide that provides physical installa-
tion and connection information
.
Installing and Configuring
the Avaya S8500 Media
Server (03-300143)
Provides installation instructions for the S8500 Media
Server
.
Administration for Network
Connectivity for Avaya
Communication Manager
(555-233-504)
Provides information on network connectivity
.

Table of Contents

Related product manuals