Avaya S8100 Series - Restoring power to the server(s)

Issue 2.1 June 2006 1231
Figure 109: Replace the server in the rack
2. Align the server on the rails and push the server into the rack until the server is flush with
the rack.
3. Push the two locking levers down to secure the server in the rack (Note 2 in Figure 109
).
4. Replace all cable connections to the front and back panels of the server.
Restoring power to the server(s)
To restore power to the S8720 server:
1. Apply power to the servers by plugging the power cable into the socket on the back of the
server.
2. Push the power button on the front panel of the servers.
Figure notes:
1.
Place server on rails, slide into place.
2.
Lock both tabs securely.
h3df87ri LAO 101905
U
I
D
2
1
0
1
1
0
d
i
s
c
C
O
M
P
A
C
T
5
4
5
4
S
i
m
p
l
e
x
D
u
p
l
e
x
ch
ch
2
1
3
2
3
2
1
2