Accessing the media server
1242 Upgrading, Migrating, and Converting Media Servers and Gateways
Computer specifications
The computer that you use to access the media server must have the following minimum
specifications:
● Windows 2000 or Windows XP operating system
● 32-MB of RAM
● 40-MB of available disk space
● An RS-232 port connector
● A Network interface card (NIC) with a 10/100BaseT Ethernet interface
● A 10/100 BaseT Ethernet, CAT5 or better, cross-connect cable with an RJ45 connector on
each end (MDI to MDI-X)
● CD-ROM drive
Network configuration
You also must configure your network connection. For more information, see Network
configuration on page 1249.
The network connection for the computer has the following TCP/IP properties:
● IP address: 192.11.13.5
● Subnet mask: 255.255.255.252
After you connect the computer to the network, you can administer the media server through
these interfaces:
● The Maintenance Web Interface for server-specific administration.
● A command line interface in a Telnet or terminal emulation application for Linux and SAT
commands, respectively. For duplicated media servers, you can use the SAT commands
on the active media server only.
For more information, see Accessing the Maintenance Web Interface
on page 1245.
To Next Page
Loading...
