Post-migration administration
Issue 2.1 June 2006 573
Verifying IPSI connectivity
To verify IPSI connectivity:
1. Under Diagnostics, click Ping.
2. Under Endpoints to Ping, select IPSIs with cab number (1–99) ___ carrier number ___.
3. Type the correct cabinet and carrier numbers in the text boxes.
4. Click Execute Ping.
5. Verify that the endpoints respond correctly.
Verifying the customer data
The new translations must include all the media gateway and circuit pack administration. This
data includes the:
● Media gateway
● Circuit pack administration of the changed cabinets
Verify that the data is correct.
Verifying circuit pack locations
To verify circuit pack locations:
1. Type list cabinet. Press Enter to view all the cabinets. Verify that the screen shows the
cabinet number that is assigned to the changed cabinets.
2. Type display cabinet number, where number is the cabinet number of the changed
cabinet. Press Enter. Under Carrier Description, Carrier Type verify that the number of
carriers there are in use matches one of the following numbers:
● For a single carrier cabinet (SCC), the number of media gateways in the stack
● For a G600 or G650 Media gateway, the number of media gateways in the rack
To Next Page
Loading...
