Converting simplex bearer to duplicated bearer on IP-PNC port networks (with S8700-series Media Servers
1204 Upgrading, Migrating, and Converting Media Servers and Gateways
!
CAUTION:
CAUTION: If, in the unlikely event that a failure occurs on an active TN2602AP circuit pack
during the setup and administration of duplication, active calls being carried on
the circuit pack are dropped. In addition, TN2602AP call processing and
interchange activity is tracked through the MEDPRO-C maintenance object. See
Maintenance Alarms for Avaya Communication Manager 3.1, Media Gateways
and Servers, 03-300430, for more information.
Checklist for converting a port network to duplicated
TN2602AP IP Media
Resource 320 circuit packs
The following sections describe the installation process:
● Checking your shipment, if not reusing existing TN2602AP circuit packs on page 1205
● Accessing the media server maintenance web interface on page 1206
● Accessing the server command line interface with SSH protocol on page 1206
● Checking software release on page 1207
● Determining the existence and location of TN2302 and TN2602AP circuit packs on
page 1208
● Upgrading firmware on the existing TN2602AP circuit packs, if necessary on page 1208
● Disabling an existing TN2602AP circuit pack or TN2302 circuit packs on page 1209
● Removing the TN2302 circuit pack hardware on page 1209
● Connecting the cables to any new TN2602AP circuit packs on page 1210
● Installing the TN771DP Maintenance Test circuit pack on page 1211
● Verifying installation and voice channels on page 1211
● Upgrading firmware on the new TN2602AP circuit packs, if necessary on page 1213
● Administering the node name for the TN2602AP circuit pack, if necessary on page 1213
● Administering the IP interface for the TN2602AP circuit packs on page 1214
● Testing the external connection to the LAN on page 1217
● Verifying active call status on page 1217
To Next Page
Loading...
