Migrating from an IP600 or S8100 to an S8400 Media Server using ftp
416 Upgrading, Migrating, and Converting Media Servers and Gateways
Prerequisites
You must complete the following tasks before you start the migration:
● Presite checklist on page 416 - Perform these tasks before you go on site.
● Additional tasks on page 418 - Perform these tasks before you start the migration from an
existing DEFINITY system.
● Presite migration checklist on page 420 - Perform these tasks before you go on site.
● Presite migration checklist on page 420 - Perform these tasks on site before you start the
migration.
● On site migration checklist on page 420 - Have these documents ready to use while you
perform the migration.
Tasks checklists
Presite checklist
Before you go on site, perform the following tasks
:
9
Task Description
Verify that your Services
laptop has the appropriate
hardware.
Correct hardware components include:
● 40 MB available disk space
● direct Ethernet cable
● serial cable and adapter
● RS-232 port connector
● Network interface card (NIC) with a 10/100
BaseT Ethernet interface
● 10/100 BaseT Ethernet, category 5, or better,
crossconnect cable with an RJ45 connector on
each end, MDI to MDI-X
● CD-ROM drive
Verify that your Services
laptop has the appropriate
software.
Correct software components include:
● Windows 2000/XP operating system
● Terminal emulation program: HyperTerminal or
other
● TCP/IP networking software: bundled with
Windows OS
● Web browser: Internet Explorer 5.0 or later
1 of 3
To Next Page
Loading...
