Migration paths
Issue 2.1 June 2006 415
Note:
Note: The IA770 INTUITY AUDIX hunt group does not require assigned AUDIX ports.
Note the extensions of the ports previously assigned to the hunt group, and
remove them from the hunt group.
Additional switch elements like a signaling group and trunk group must also be administered to
support IA770 INTUITY AUDIX Messaging. For information on how to administer these and all
switch integration elements, see Avaya IA770 INTUITY AUDIX Messaging Application Release
3.1 Administering the S8300 and S8400 Media Servers to Work with IA770, 07-600788.
Removing unused INTUITY AUDIX ports or hunt groups
The previously administered INTUITY AUDIX analog ports from the S8100 translations are part
of the overall station usage of the switch and count against the maximum station capacity
available on the S8400 Media Server. The hunt group for the IA770 INTUITY AUDIX
applications does not use analog ports. Therefore, after you modify the AUDIX hunt group for
IA770 INTUITY AUDIX Messaging, the hunt groups’s previously assigned AUDIX ports are
available for use by telephones or other devices. Use the remove station command to
remove these ports from the switch so that they can be added later for future use.
If you do not replace the S8100 embedded INTUITY AUDIX application as part of the migration
to the S8400 Media Server, you should remove the hunt group from switch administration, and
then remove the analog ports. In this case, you also must modify the administration of each
subscriber telephone to remove the AUDIX coverage path.
For information on how to administer these elements, see Avaya IA770 INTUITY AUDIX
Messaging Application Release 3.1 Administering the S8300 and S8400 Media Servers to Work
with IA770, 07-600788.
Migration paths
The IP600 or S8100 and their releases that can be migrated to S8400 Media Server
configuration include:
● Communication Manager Release 9 and later
To migrate, you can use the existing translations. The only supported method to move
translations from legacy systems is to use ftp.
When you migrate from an IP600 or an S8100 to an S8400 Media Server using ftp:
1. On the SAT, copy the translation files.
2. Move the translations onto the Services laptop.
3. Copy the translations to the S8400 Media Server.
To Next Page
Loading...
