Converting S8300 LSP mode to ICC mode
1150 Upgrading, Migrating, and Converting Media Servers and Gateways
Before going to the site
Perform the tasks in this section before going to the customer site.
Task Steps/Comments
1. Redesign networks.
Assess the impact of the LSP to ICC conversion
on all voice and voice messaging network
nodes. Plan for any necessary changes to
network elements.
In particular, collect the server configuration
information for the new ICC; that is, host name
and IP address, primary controller IP address,
DNS/DHCP IP addresses (if used), UPS IP
addresses (if used), static routes data (if used),
time server data, modem return route data (if
supported by Avaya Services).
2. Create/update license
and authentication files
on the RFA web site.
Go to http://rfa.avaya.com
and follow the steps
in Converting between an LSP and ICC
(or a
similar region-specific document if the system is
outside the U.S.) to create new license and
authentication files for the ICC.
3. Obtain
post-conversion
service pack file, if any.
Go to http://support.avaya.com
and click
Downloads to see if there is a service pack file
available for the Communication Manager
release you are currently running, for example,
release 3.1, load 628.0 If there is a service pack
file available, download it and take it to the site.
To Next Page
Loading...
