Avaya S8100 Series - Verifying hardware; Opening a SAT session; Copying translation files

Migrating from an IP600 or S8100 to an S8400 Media Server using ftp
426 Upgrading, Migrating, and Converting Media Servers and Gateways
Verifying hardware
Ensure that you have the conversion specific hardware on hand.
Note:
Note: The TN8400AP Media Server circuit pack that contains the IA770 feature
replaces the TN795 or TN2314 Processor circuit pack that does not have that
feature. The current processor circuit pack must be returned to Avaya.
Opening a SAT session
To open a SAT session:
1. Using a crossover cable, connect the Services laptop to the Services port on the TN2314 or
TN795 Processor circuit pack.
2. Click Start > Run to open the Run window
3. Type telnet 192.11.13.6. Press Enter.
4. Log in as lucent3.
5. At the LAC prompt, type definity or multivantage. Press Enter.
6. For the terminal type, select NTT.
Copying translation files
To copy translation files:
1. On the SAT, type save translations. Press Enter.
2. Type logoff and press Enter.
3. At the LAC prompt, type bash. Press Enter.
4. Type ftpserv. Press Enter.
5. At the prompt, type cd d:/LucentData/Definity. Press Enter.
6. Type cp xltn1_data.xln d:/LucentPub/ftproot/. Press Enter.
7. Type cp xltn2_data.xln d:/LucentPub/ftproot/. Press Enter.
8. Type ftpserv to turn on the ftp services. Press Enter.