Upgrading Communication Manager on Avaya S8700 Media Server from R1.x to R3.1
172 Upgrading, Migrating, and Converting Media Servers and Gateways
Ignore this message. You must wait until the restart or the reset is complete before you
enter additional commands.
The media server displays a message that the service pack was applied.
7. Type update_show again and press Enter to list Communication Manager files to verify
that the new service pack file is activated.
Verifying installation of the service pack
To show the latest service pack:
1. Under Server click Software Version.
2. Verify that the new service pack is listed.
Note:
Note: You usually select the Make Upgrade Permanent function on the Maintenance
Web Interface at this point. However, this is not necessary for this upgrade
because there is no previous software version in the alternate partition.
To Next Page
Loading...
