Migration tasks
Issue 2.1 June 2006 427
Opening an ftp session
To open an ftp session on the Services laptop:
1. On the Services laptop, click Start > Run to open the Run window.
2. Create a customer directory or create a directory at \temp for this migration.
3. Type cmd. Press Enter.
4. Type cd \temp or the directory location. Press Enter.
5. Type ftp 192.11.13.6. Press Enter.
6. Log in as anonymous. Press Enter.
7. For the password, press Enter.
8. At the ftp prompt, type bin. Press Enter.
9. Type get xltn1_data.xln. Press Enter.
10. Type get xltn2_data.xln. Press Enter.
11. Type bye. Press Enter to close the ftp session.
Moving the translation files
To move the translation files on the Services laptop
● Move the xln files to the c:/temp directory.
Turning off power to all cabinets
!
CAUTION:
CAUTION: Ensure that you have done the premigration administration. For more
information, see Premigration administration
.
To turn off power to all cabinets:
1. From the bash prompt on the Services laptop, type shutdown system and press Enter to
perform a graceful shutdown.
2. Wait until the Shutdown Complete LED on the lower portion of the faceplate of the
processor is solid green
3. Turn off the power to all cabinets.
To Next Page
Loading...
Need help?
General
