Migration tasks
Issue 2.1 June 2006 531
Backing up translations
To back up translations:
1. Under Data Backup/Restore, click Backup Now.
2. Select the data sets and the backup method.
If you select Save ACP translations prior to backup, the media server automatically
saves the translations to the hard drive before the media server saves the translations to
the backup media.
3. Click Start Backup to begin the backup process.
Migration tasks
Perform these tasks to convert a processor port network to a port network (MCC).
Verifying hardware
Ensure that you have the conversion specific hardware on hand.
Removing the processor port network control carrier
To remove the processor port network control carrier:
1. Label both ends of all the cables being removed from the control carriers. They can be
reused.
!
CAUTION:
CAUTION: The system drops all active calls that are processed through this PN when the
cabinet is turned off. The trunks and the lines within this cabinet do not operate
until the cabinet is turned on and the media server controls the port network.
!
CAUTION:
CAUTION: Do not turn off the survivable remote expansion port networks. If the EPNs are
turned off, the system cannot process calls.
To Next Page
Loading...
