Migrating from an S8700 Media Server to an S8710 Media Server
898 Upgrading, Migrating, and Converting Media Servers and Gateways
Migration tasks
Perform the following tasks to migrate an S8700 Media Server to an S8710 Media Server.
Premigration administration:
● Upgrading G150, G350 or G700 Media Gateways and local survivable processors (if being
used) on page 900
● Upgrading software on the local survivable processors on page 901
● Upgrading firmware on media gateways and media modules on page 902
● Verifying hardware on page 902
On the active S8700 Media Server:
● Clearing the ARP cache on the laptop computer on page 902
● Connecting to the active media server on page 903
● Accessing the media server maintenance web interface on page 904
● Clearing alarms on page 904
● Starting a SAT session on page 904
● Recording all busyouts on page 905
● Checking clock synchronization on page 905
● Disabling scheduled maintenance on page 905
● Busying out MMI circuit packs with SAT for a duplicated control network only (main server
only) on page 906
● Checking for translation corruption on page 906
● Checking the software release on page 906
● Backing up the Linux migration upgrade set to the network on page 907
● Backing up the Linux migration upgrade set to the services laptop on page 908
● Recording the Product ID on page 909
On the standby S8700 Media Server:
● Accessing the standby S8700 Media Server on page 909
● Shutting down the S8700 Media Server on page 910
On the first S8710 Media Server:
● Turning on the media server on page 910
● Accessing the media server on page 911
● Configuring Telnet for Windows 2000 or Windows XP on page 911
To Next Page
Loading...
Need help?
General
