Avaya S8100 Series - Disconnecting from the active media server; Upgrade tasks (second media server); Connecting to the standby media server; Copying preupgrade service pack(s) to the standby media server

Upgrade tasks (second media server)
Issue 2.1 June 2006 177
Disconnecting from the active media server
If you are on site, unplug the laptop computer from the services port on the back of the active
media server.
Upgrade tasks (second media server)
Connecting to the standby media server
If you are on site, connect to the services port on the back of the standby media server.
If you are off site, log on to the standby media server with the actual IP address of the media
server.
Copying preupgrade service pack(s) to the standby media server
Copy the preupgrade service pack(s) from the computer to the media server.
To copy files to the media server, complete the following steps:
1. On the Maintenance Web Interface, under Miscellaneous, select Download Files.
2. Select File(s) to download from the machine I’m using to connect to the server.
3. Click Browse next to the top field to open the Choose File window on your computer. Find
the files that you need to copy to the media server.
4. Click Download to copy the file(s) to the media server.
The system copies files automatically to the default file location.
Busying out the standby media server
To busy out the media server.
1. Under Server, select Busy-Out Server. Then click Busy Out to busy out the standby
server.
2. Click Status Summary to verify that the standby server is busied out.