Migration tasks
Issue 2.1 June 2006 331
Documentation checklist for migrations
For a list of documents that are needed to perform the migration, see Resources on page 54.
Migration tasks
The information in this section is based on the assumption that the media server complex is
installed, configured, and operational.
!
CAUTION:
CAUTION: This migration affects service. When the PPN is turned off, the system drops all
calls. Service returns when the media server takes control of the IPSIs.
The general migration procedures are as follows:
● Turn off the processor gracefully - pre-conversion administration
● Replace the processor circuit pack or tone clock circuit pack with a TN8412AP S8400 IP
Interface (SIPI) circuit pack
● Connect the SIPI circuit pack to the Ethernet switch on the customer network
● Assign an IP address to the SIPI circuit pack
9
Document Description
Quick Start for Hardware
Migration: Avaya S8400
Media Server in an Avaya
CMC1 or G600 Media
Gateway (03-300706)
A quick reference guide that provides physical installa-
tion and connection information
.
Installing and Configuring
the Avaya S8400 Media
Server (03-300678)
Provides installation instructions for the S8400 Media
Server
.
Administration for Network
Connectivity for Avaya
Communication Manager
(555-233-504)
Provides information on network connectivity
.
To Next Page
Loading...
