Migrating from a DEFINITY Server CSI in a CMC with a Linear Flash to an S8400 Media Server that uses a
332 Upgrading, Migrating, and Converting Media Servers and Gateways
You can reuse the translations from the existing system when you migrate to an S8400 Media
Server.
Note:
Note: You must install the new Communication Manager license file on the media
server before you make the change. The SIPI serial number can be used for
licensing purposes.
Perform the following tasks to convert a processor port network to a port network (CMC).
Premigration administration:
● Accessing Remote Feature Activation on page 333
● Connecting to the processor on page 335
● Removing netcon data modules on page 336
● Verifying system status on page 337
● Recording all busyouts on page 337
● Recording node names and IP addresses on page 337
● Saving translations on page 338
Migration tasks:
● Verifying hardware on page 338
● Turning off power to all cabinets on page 339
● Removing circuit packs on page 339
● Inserting circuit packs on page 339
● Connecting cables on page 340
● Replacing the TN799C C-LAN circuit pack on page 340
● Installing TN771 Maintenance/Test on page 341
● Installing the software load on page 341
● Configuring the media server on page 342
● Installing the license and authentication file on page 343
● Copying translation files to the media server on page 344
Postmigration administration:
● Using static addressing on page 346
● Clearing the ARP cache on the laptop computer on page 346
● Logging in to the SIPI on page 347
● Setting the control interface on page 348
To Next Page
Loading...
