Migrating from an S8700 or S8710 Media Server to an S8720 Media Server
982 Upgrading, Migrating, and Converting Media Servers and Gateways
9. Lift and turn the thumbscrew knobs clockwise while pressing down, until tightened.
10. Turn the thumbscrews counterclockwise to lower the thumbscrew knobs.
11. Install the access cover on the media server.
12. Press down on the hood latch handle to lock the access panel in place.
Installing the first S8720 Media Server in the rack
To install the first S8720 Media Server in the rack:
1. Snap the rails on to the media server.
2. Attach the extension rails to the rack.
3. Install the S8720 Media Server in the rack. For more information, see Quick Start for
Hardware Installation: S8700 Series Media Servers (03-300145).
Inserting the Communication Manager software distribution CD
To insert the Communication Manager software distribution CD in the S8720 Media Server:
Note:
Note: You must place the CD in the CD/DVD drive before turning on the media server.
1. Use a paperclip to open the CD-ROM drive on the media server.
2. Insert the CM software distribution CD in the CD/DVD drive and close the drive door.
To Next Page
Loading...
