On the active S8700 or S8710 Media Server
Issue 2.1 June 2006 963
4. Fill in the following fields for where you are backing up the files:
● User Name
● Password
● Host Name - enter the host IP address
● Directory
5. Click Submit.
6. Under Server Upgrades, click Linux Migration (Backup / Restore) to review the status of
the backup.
The system displays the Linux Migration - Backup / Restore Status window.
7. Select Display status
8. Click Submit.
The system displays the Linux Migration - Backup / Restore Status window.
This window might display a BACKUP COMPLETE message with possible series 200 error
messages. You can ignore these series 200 error messages and proceed with the backup.
Backing up the configuration data and translations using Linux Migration
Backup to the Services laptop
This procedure assumes that you are backing up from Communication Manager release pre2.x.
The backup destination is the IP address of the server being backed up. The backup is followed
by a transfer of the backup file to the laptop. This backup is a manual process.
To back up the configuration data and translations using the Linux Migration Backup/Restore
from the S8700 or S8710 Media Server to the Services laptop:
1. Under Server Upgrades, click Linux Migration (Backup/Restore).
The system displays the Linux Migration - Backup / Restore window.
2. Select Initiate new backup or restore and click Submit.
The system displays the Linux Migration - Backup / Restore Initiate window.
3. In the Backup Method section, select FTP.
4. In the following fields:
● User Name field: type anonymous
● Password field: enter any password with a @
● Host Name field: enter the IP address of the server being backup up
The Host Name field must use the host IP address.
To Next Page
Loading...
Need help?
General
