Migrating from a DEFINITY Server CSI in a CMC with a Linear Flash to an S8400 Media Server that uses a
336 Upgrading, Migrating, and Converting Media Servers and Gateways
Removing netcon data modules
To remove Netcon data module information:
1. Type list data module. Press Enter.
The system displays the Data Module window.
2. Notice if the system contains any Netcon circuit packs.
If there are Netcon data modules, continue to step 3.
If there are no Netcon data modules, continue to Verifying system status
on page 394.
3. Type list user ext x. Press Enter where x shows who is using the associated Netcon
data module.
For example, the screen in step 3
shows the extension 2501 is being used on Hunt Group
99.
4. Type change hunt-group xx. Press Enter where xx is the hunt group number.
The system displays the Hunt Group window.
5. In the Hunt Group screen, press the space bar to highlight the information. Press Return to
remove the information.
6. Repeat for each extension.
7. When you finish, press Submit.
8. Repeat for each listing.
9. Type remove data-module xxxx. Press Submit where xxxx is the extension to be
removed.
10. Repeat for all items listed on the list data module command.
list usage extension 2501
LIST USAGE REPORT
Used By
Hunt Group Group Number 99 Member 1
Command successfully completed
To Next Page
Loading...
