Upgrading Communication Manager on Avaya S8500 Media Server from R2.x/R3.0 to R3.1 or from R3.1 to
132 Upgrading, Migrating, and Converting Media Servers and Gateways
Backing up recovery system files
To back up the system configuration files:
1. Under Data Backup/Restore, click Backup Now.
2. Select the data sets, including Avaya Call Processing (ACP) translations and Save ACP
translations prior to backup. Do not select Full Backup because this option does not
save translations.
Note:
Note: If you back up to a flashcard, Avaya recommends that you use a different
flashcard from the one with the prior release translations. You might need these
translations if you need to back out of the upgrade, migration, or conversion
procedure.
3. Select the backup method.
4. Click Start Backup to start the back up process.
Verifying the backup
To verify that the backup was successful:
1. Under Data Backup/Restore, select Backup History.
2. Select the backup that you want to verify, and click Check Status.
The system displays the status of the backup.
3. Verify that Backup Successful appears for each data set in the backup.
Suppressing alarming
!
CAUTION:
CAUTION: Ensure that you suppress alarming during the upgrade. If you do not, the system
can generate alarms, resulting in unnecessary trouble tickets.
To suppress alarming:
1. Access the command line interface of the server with telnet and an IP address of
192.11.13.6.
To Next Page
Loading...
