Upgrading Communication Manager on Avaya S8700-series Media Servers or S8700-series ESS from R2.x/
232 Upgrading, Migrating, and Converting Media Servers and Gateways
Installing the new license and Avaya authentication files on newly
active media server
Note:
Note: You must install the license file on an active media server and before you install
the Avaya authentication file. If the license is installed on the standby media
server, the error message Filesync of new license to standby
server failed, rc=0, result=10 appears.
To install the new license and authentication files on the newly active media server:
Note:
Note: The media servers are currently on different releases of Communication
Manager. Therefore, the system reports an error when you install the license file.
1. Under Security, click License File.
2. Select Install the license I previously downloaded and click Submit to install the license
file.
The system displays a message that tells you the license is installed successfully.
3. Under Security, click Authentication File.
4. Click Install the Authentication file I previously downloaded and click Install.
The system displays a message that tells you the authentication file is installed successfully.
Disconnecting from the newly active media server
If you are on site, unplug the laptop computer from the services port on the back of the newly
active media server.
To Next Page
Loading...
