Migrating a DEFINITY ONE/S8100 to an S8500 Media Server
556 Upgrading, Migrating, and Converting Media Servers and Gateways
Note:
Note: You must install the new Communication Manager license file on the media
server before you make the change or the system will not run.
Perform the following tasks to convert a processor port network to a port network (CMC).
Premigration administration:
● Connecting to the processor on page 557
● Recording node names and IP addresses on page 558
● Saving translations on page 558
● Recording IP settings on page 558
Migration tasks:
● Accessing the media server maintenance web interface on page 559
● Verifying the license file on page 560
● Copying translation files to media server on page 560
● Restoring translation files on page 560
● Administering the IPSIs on page 561
● Setting the alarm activation level on page 562
● Backing up translations on page 562
● Verifying hardware on page 563
● Changing the control cabinet to a port network on page 563
● Turning off the power to the control cabinet on page 564
● Replacing the processor circuit pack on page 564
● Replacing the TN799C C-LAN circuit pack on page 565
● Installing TN771 Maintenance/Test circuit pack on page 565
● Connecting to the media server on page 565
Post-migration administration:
● Accessing the server command line interface with SSH protocol on page 566
● Using static addressing on page 567
● Clearing the ARP cache on the laptop computer on page 568
● Logging in to the IPSI on page 569
● Setting the control interface on page 569
● Setting the VLAN and diffserv parameters on page 571
● Resetting the IPSI on page 571
● Verifying IPSI translations on page 572
To Next Page
Loading...
