Avaya S8100 Series - Page 943

Migration tasks
Issue 2.1 June 2006 943
4. Accessing the media server maintenance web interface on page 953
5. Checking the software release
on page 953
6. Clearing alarms
on page 953
7. Starting a SAT session
on page 954
8. Recording all busyouts
on page 954
9. Checking clock synchronization
on page 954
10. Disabling scheduled maintenance
on page 955
11. Busying out MMI circuit packs with SAT for a duplicated control network only (main server
only) on page 955
12. Checking for translation corruption
on page 956
13. Saving translations
on page 956
14. Checking the CNC status
on page 957
15. Recording the server connection type
on page 957
16. Backing up the active S8700 or S8710 Media Server
on page 958
17. Obtaining the Product ID on the active S8700 or S8710 Media Server
on page 965
18. Looking up server configuration information on the active S8700 or S8710 Media Server
on
page 965
19. Disconnecting from the active S8700 or S8710 Media Server
on page 966
On the standby S8700 or S8710 Media Server:
1. Checking the software release
on page 966
2. Clearing the ARP cache on the laptop computer
on page 967
3. Connecting to the standby S8700 or S8710 Media Server
on page 967
4. Accessing the standby S8700 or S8710 Media Server
on page 967
5. Checking the CNC status
on page 968
6. Recording the server connection type
on page 968
7. Backing up the standby S8700 or S8710 Media Server
on page 968
8. Obtaining the Product ID on the standby S8700 or S8710 Media Server
on page 976
9. Looking up server configuration information on the standby S8700 or S8710 Media
Server on page 976
10. Busying out the standby S8700 or S8710 Media Server
on page 977
11. Shutting down the standby S8700 or S8710 Media Server
on page 977
12. Removing the duplication cables
on page 978