Configuration Diagrams
Issue 2.1 June 2006 1111
5. IP-PNC PN, with two carriers, that contains:
● An E-position control carrier with a TN2312AP/BP IPSI circuit pack for IP connection to server.
● A D-position duplicated control carrier with:
- A TN2312AP/BP IPSI circuit pack for IP connection to the server.
- A TN2302AP IP Media Processor or the TN2602AP IP Media Resource 320 for IP-TDM voice processing
- An optional TN799DP CLAN for control of IP endpoints
6. IP-PNC PN, with two carriers, that contains:
● A C-position port carrie with:r
- A TN2302AP IP Media Processor or a TN2602AP IP Media Resource 320 for IP-TDM voice processing
- An optional TN799DP CLAN for control of IP endpoints
● B-position port carrier a TN2312AP/BP IPSI circuit pack for IP connection to the server.
7. IPSI-to-server control network connection through the Ethernet switch.
8. LAN connections of a TN2302AP IP Media Processor or a TN2602 IP Media Resource 320 for IP-TDM voice processing
and an optional TN799DP CLAN for control of IP endpoints
NOTE: The number of TN2302AP, TN2602AP, and TN799DP circuit packs varies, depending on the number of IP
endpoints, port networks, and adjunct systems. These circuit packs can be inserted into a port carrier, as shown in
the figure, or the PN control carrier.
9. Customer LAN
10. LAN connections of media servers for remote administration
11. Duplicated server links, including the fiber link for translations transfer and the DAL1 link for control data sharing.
Figure notes: Example of an MCC1 Media Gateway with IP-PNC and
mixed reliability (continued)
2 of 2
To Next Page
Loading...
