Converting simplex bearer to duplicated bearer on IP-PNC port networks (with S8700-series Media Servers
1212 Upgrading, Migrating, and Converting Media Servers and Gateways
4. Type display system-parameters customer-options and press Enter.
The Optional Features screen appears.
5. Go to page 2 of the Option Features screen.
Figure 101: System Parameters Customer-Options screen
6. Find the appropriate field, either the Maximum TN2602 Boards with 320 VoIP Channels
or Maximum TN2602 Boards with 80 VoIP Channels
field. Subtract the number in the
Used column with the maximum number listed to the left of the Used column.
If you are installing two new TN2602AP circuit packs, there must be two boards of the same
number of channels available. If not, a new license must be installed. If you are installing
one new TN2602AP because the port network already has one available, then there must
be one board of the same number of channels available.
display system-parameters customer-options page 2 of x
OPTIONAL FEATURES
IP PORT CAPACITIES USED
Maximum Administered H.323 Trunks:
Maximum Administered IP Trunks: 100 96
Maximum Concurrently Registered IP Stations: 10 10
Maximum Administered Remote Office Trunks: 0 0
Maximum Concurrently Registered Remote Office Stations: 0 0
Maximum Concurrently Registered IP eCons: 0 0
Maximum Video Capable H.323 Stations: 0 0
Maximum Video Capable IP Softphones: 0 0
Maximum Administered SIP Trunks:
Maximum Number of DS1 Boards with Echo Cancellation: 0 0
Maximum TN2501 VAL Boards: 1 0
Maximum G250/G350/G700 VAL Sources: 0 0
Maximum TN2602 Boards with 80 VoIP Channels: 20 12
Maximum TN2602 Boards with 320 VoIP Channels: 4 3
Maximum Number of Expanded Meet-me Conference Ports: 0 0
(NOTE: You must logoff & login to effect the permission changes.)
To Next Page
Loading...
