Upgrade tasks
Issue 2.1 June 2006 125
● Installing the preupgrade software service pack only if starting from R2.x on page 130
● Copying files to the media server on page 131
● Resolving alarms on page 131
● Backing up recovery system files on page 132
● Verifying the backup on page 132
● Suppressing alarming on page 132
● Inserting the Communication Manager CD-ROM into the media server on page 133
● Copying Communication Manager to the media server on page 134
● Removing the CD-ROM from the CD-ROM drive on page 135
Upgrade tasks:
● Starting the Upgrade Tool on page 136
● Installing Avaya authentication files (if required) on page 137
● Verifying software operation on page 137
● Checking system status on page 138
● Setting the Processor Ethernet on page 138
● Copying IP telephone firmware to the media server, if necessary (main server only) on
page 139
PostUpgrade tasks:
● Restoring the 4600-series IP Telephone configuration file, if any (main server only) on
page 139
● Enabling scheduled maintenance with SATon page 140
● Busying out previously busied out trunks on page 140
● Checking for translation corruption on page 140
● Resolving alarms on page 140
● Backing up recovery system files on page 141
● Releasing alarm suppression (optional) on page 141
● Logging off all administration applications on page 141
● Registering Avaya Communication Manager on page 142
● Upgrading the G150 Media Gateways, if used on page 142
To Next Page
Loading...
