Upgrading Communication Manager on Avaya S8700 Media Server from R1.x to R3.1
150 Upgrading, Migrating, and Converting Media Servers and Gateways
● Verifying service pack installation on page 189
● Restoring the Linux migration backup files on page 190
● Verifying date and time on page 191
● Verifying software operation on page 191
● Checking system status on page 192
● Releasing the standby media server on page 192
● Disconnecting from the standby media server on page 192
● Connecting to the active media server on page 192
PostUpgrade tasks:
● Enabling scheduled maintenance with SATon page 193
● Releasing MMI circuit packs with SAT (duplicated control network only) on page 193
● Busying out previously busied out trunks on page 194
● Checking for translation corruption on page 194
● Resolving alarms on page 194
● Backing up recovery system files on page 194
● Releasing alarm suppression (optional) on page 195
● Logging off all administration applications on the active media server on page 195
● Disconnecting from the active media server on page 195
● Connecting to the standby media server on page 196
● Backing up files on the standby media server on page 196
● Releasing alarm suppression (optional) on page 196
● Starting call processing on the LSPs and ESSs, if any (main server only) on page 197
● Logging off all administration applications on the standby media server on page 197
● Registering Avaya Communication Manager on page 198
To Next Page
Loading...
