Migration tasks
Issue 2.1 June 2006 391
Note:
Note: You must install the new Communication Manager license file on the media
server before you make the change. The SIPI serial number can be used for
licensing purposes.
Perform the following tasks to convert a processor port network to a port network (CMC).
Premigration administration:
● Connecting to the processor on page 392
● Removing netcon data modules on page 393
● Saving translations on page 394
● Verifying system status on page 394
● Recording all busyouts on page 394
● Recording node names and IP addresses on page 395
Migration tasks:
● Verifying hardware on page 395
● Connecting to the SAT on page 396
● Copying translation files on page 396
● Turning off power to all cabinets on page 396
● Removing circuit packs on page 397
● Inserting circuit packs on page 397
● Connecting cables on page 397
● Replacing the TN799C C-LAN circuit pack on page 398
● Installing TN771 Maintenance/Test on page 398
● Installing the software load on page 399
● Configuring the media server on page 399
● Installing the license and authentication file on page 401
● Copying translation files to the media server on page 401
● Copying translation files to the media server on page 402
● Closing all sessions on page 403
Postmigration administration:
● Using static addressing on page 403
● Clearing the ARP cache on the laptop computer on page 404
● Logging in to the SIPI on page 405
● Setting the control interface on page 406
To Next Page
Loading...
