Migration tasks
Issue 2.1 June 2006 587
Perform the following tasks to convert a processor port network to a port network (IP600).
Premigration administration:
● Connecting to the processor on page 588
● Recording node names and IP addresses on page 589
● Saving translations on page 589
● Saving translations on page 589
Migration tasks:
● Accessing the media server maintenance web interface on page 590
● Verifying the license file on page 590
● Copying translation files to media server on page 591
● Administering the IPSIs on page 591
● Adding IPSI translations to Communication Manager on page 592
● Setting the alarm activation level on page 592
● Backing up translations on page 592
● Verifying hardware on page 593
● Changing the IP600 control chassis to a port network on page 593
● Turning off the control chassis on page 594
● Replacing I/O cables on page 595
● Replacing the processor circuit pack on page 597
● Replacing the TN799C C-LAN circuit pack on page 598
● Installing TN771 Maintenance/Test circuit pack on page 598
● Connecting to the media server on page 598
Post-migration administration:
● Accessing the server command line interface with SSH protocol on page 599
● Using static addressing on page 600
● Clearing the ARP cache on the laptop computer on page 601
● Logging in to the IPSI on page 602
● Setting the control interface on page 602
● Setting the VLAN and diffserv parameters on page 604
● Resetting the IPSI on page 604
● Verifying IPSI translations on page 605
● Verifying IPSI connectivity on page 606
To Next Page
Loading...
