Introduction
60 Upgrading, Migrating, and Converting Media Servers and Gateways
Converting some or all direct-connect port networks to
IP-connect on page 1047
Presents the tasks required to
convert an S8500 or S8700-Series
media server from a direct connect
configuration to an IP-PNC
configuration.
Converting some or all CSS port networks to
IP-PNC on page 1079
Presents the tasks required to
convert an S8700-Series media
server from a CSS (multi-connect
configuration) to an IP-PNC
configuration.
Converting some or all ATM port networks to
IP-PNC on page 1115
Presents the tasks required to
convert an S8700-Series media
server from an ATM (multi-connect
configuration) to an IP-PNC
configuration.
Chapter 8: Converting the Media Server Mode
on
page 1147
Introduces the modules associated
with converting to a different mode
(new function).
Converting S8300 ICC mode to LSP mode on
page 1157
Presents the tasks required to
convert an S8300 Media Server
configured in the ICC mode to an
S8300 Media Server configured in
the LSP mode.
Converting S8300 LSP mode to ICC mode
on
page 1149
Presents the tasks required to
convert an S8300 Media Server
configured in the LSP mode to an
S8300 Media Server configured in
the ICC mode.
Converting IP-PNC port networks with simplex control
to duplicated control on page 1181
Presents the tasks required to
convert a port network from simplex
control to duplicated control.
Converting simplex bearer to duplicated bearer on
IP-PNC port networks (with S8700-series Media
Servers only) on page 1201
Presents the tasks required to
convert a port network from simplex
bearer to duplicated bearer.
Section, chapter, or module Description
5 of 6
To Next Page
Loading...
